For when size matters
The latest addition to the Cogsdill Burnishing portfolio is the Universal Diamond Burnishing Tool Mini Series (UDBTM).
Following on from the success of the original UDBT Series, we are pleased to introduce a smaller sibling designed specifically for CNC sliding head lathes (Swiss-type).
Using Cogsdill’s proven diamond insert geometry, our premium range of burnishing tools can achieve low RA surface finishes, by cold flowing the peaks into the valleys in one pass – achieving results not attainable from any other metal removal process.
UDBTM are designed to be adjustable through 180 degrees, which makes them the ideal choice tool for varying component applications where a designated orientated tool is not required.
The quick and simple castellated adjustment makes this the most versatile diamond burnishing tool on the market!
The range has just got bigger
(actually, it’s just got smaller!)
Cogsdill Universal Diamond Burnishing Tool Mini Series (UDBTM) is a compact burnishing solution, with the adjustment head not much bigger than a cent (as shown in the illustration). But don’t let it’s small size fool you, this tool offers huge return on investment.
UDBTM are designed to produce mirror-like finishes on any surface; from carbon steels to tool steels, cast iron to alloys, and most ferrous and non-ferrous metals.
UDBTM offers the flexibility for burnishing outside diameters, tapers and faces to achieve superior surface finishes not achieved by turning alone.
Further more, set up and operation is relatively simple, no special operator skills are required.
As a result, Cogsdill UBDTM offers incredible production efficiencies and cost effectiveness.
There are currently two different models available:
- UDBTM-S-12 (Square Shank with 12mm section)
- UDBTM-R-16 (Round Shank with 16mm diameter)
The UDBTM-S-12 is supplied with a clamp plate assembly extending its versatility for varying machine configurations.
Machine tool requirements:
Developed as a solution for burnishing on CNC Swiss-type sliding head machines, this single tool streamlines operations significantly as it can be utilized in either left or right-handed machine configurations, with either round or square shanks to suit tool post or collet installation.
Compatible with many CNC sliding head lathes including:
How Universal Diamond Burnishing Tool Mini Series work:
|1||Undo the retaining cap head with a hex wrench which will release the castellated housing from its locked position.|
|2||Rotate the housing to the required angle and then tighten the retaining cap head to secure the tool.|
|3||The UDBTM is then mounted in the tool post or collet of the desired machine, using the square shank clamp plate assembly if required.|
|4||The diamond burnishing nib is brought into contact with the workpiece at the centerline of the part and against the surface being finished.|
|5||The tool is then fed into the workpiece an additional .002 or .003 inch (.05 or .08mm) to allow the diamond insert to become disengaged from the stop in the holder.|
|6||The spring, with its preload, forces the diamond against the workpiece.|
|7||The tool is then fed along the surface of the rotating workpiece to produce a mirror-like finish.|
Small Tool. Big Possibilities.
Produce mirror-like finishes on CNC sliding head lathes.
A standard range of tools are available from stock.
Please contact us for next day delivery.
Standard Tool Specifications
UDBTM-S-12 (with Clamp Plate Assembly)
Replaceable Diamond nibs
The Diamond nibs are easily replaced once they have worn. The nibs are interchangeable between all sizes and styles across the UDBT/M series.
|1||Simply undo the retaining nib holder with a wrench, and remove the nib from the holder.|
|2||Make sure that that tool body and holder are clean.|
|3||Replace the o’rings on the nib, insert the nib into the holder and screw back into the tool body.|
|4||Re-tighten the retaining nib holder with a wrench.|